SIBOM Skid Steer Hydraulic Cold Planer, Precision Control, High Flow Required

1. Can be adapted to a sliding loader with a large flow hydraulic working system for milling asphalt pavement or concrete pavement milling operations
2. Equipped with a self-leveling adjustment system, the milling depth in the case of tilt, the operation is more simple.
3. The overall structure is relatively simple, easy to replace the milling and plane drum.
4. Can make the milling planer side movement, no need to ride on the curb and ditch construction and get a better milling effect.
5. An optional spray system can effectively inhibit the dust. At the same time, it can effectively cool the teeth intercept and prolong the service life and working time of the teeth intercept.
6. The milling width is large, the milling width can reach 1000mm, the operation efficiency is high.

Super torque output      

Bocland MS series dual motor drive, super torque output, to meet the small machine large depth milling. High milling efficiency, stronger and more stable performance.

Milling system

The robot arm welding has accurate positioning, high milling efficiency and good discharging effect. The overall dynamic balance check to ensure smooth operation and reduce the vibration of equipment. Equipped with Kenner carbide teeth, the milling effect is good, high wear resistance.

Self-leveling system

The equipment will be based on the ground conditions, and the equipment's self-leveling system can maintain a constant cutting depth from the ground, regardless of the host position.

Independent depth regulation system

The depth adjustment board on both sides of the milling machine can be adjusted separately, with strong adaptability and can be milling side by side to improve the operation efficiency.

Self-reset floating tilt device

The mill can be the left and right sides at a certain Angle, can be automatically adjusted according to the ground tilt. With a self-reset device and will automatically recover when the equipment is lifted. By adjusting the different depths of the floating plates on both sides, the inclined groove milling can be performed.

Purpose-built for high-flow circuits, this asphalt planer for skid steer slices cleanly through pavement while its ±8° inclination angle and 20-inch lateral shift let you track curbs, gutters, and bridge decks without repositioning the carrier.

The planer’s frame hugs the loader arms, so you can slip into alleys, freight yards, or airport aprons where larger mills can’t reach. Dial in a cutting depth from feather-edge to more than six inches using the cab-mounted self-leveling control, and watch the dust-suppression spray system keep silica and asphalt fines out of the air. A quick-change drum accepts both standard and fine-finish teeth, making it the ideal pavement milling attachment for everything from surface prep to full-depth patching.

Inside, a sealed hydraulic motor drives a balanced drum that rides on heavy-duty bearings; you get smooth, low-vibration cuts even at maximum depth. All wear parts—teeth, holders, and the replaceable planer drum itself—swap out quickly with basic tools, so routine maintenance never sidelines your crew or your rental fleet.

Whether you’re a municipal team handling curb-to-curb resurfacing, a contractor tackling bridge deck repair, or a utility crew opening trenches for conduit, this skid steer milling head delivers contractor-grade productivity in a compact footprint. It’s the go-to road surface preparation tool for transportation departments, civil contractors, and anyone who needs reliable, high-precision milling on demand.